RR plinth self-adhesive white with black stripe Sticker wall 2300*70*4mm (D) SW-00001830

RR plinth self-adhesive white with black stripe 2300*70*4mm (D) SW-00001830 - this is a decorative element that is installed along the bottom of the wall to hide the joint between the wall and the floor. Thanks to its adhesive base, it is easy to install without the need for additional materials, making it an ideal choice for a variety of interior applications.

Peculiarities:

- Material: porous polypropylene.
- Dimensions: 70x2300x4 mm.
- Weight: plinth 70 mm - 65 grams.
- Texture: embossed, matte surface.

Layers of polypropylene plinth:

1. The first layer is a PVC film consisting of long molecules of vinyl chloride with chlorine atoms, which provides the material with resistance to chemicals. Due to its amorphous structure, PVC has elasticity, lightness and a high degree of protection from mechanical damage.
2. The second layer is a decorative coating made using high-quality color printing, which retains its brightness for a long time.
3. The core layer is made of cellular polypropylene (CPP), a thermoplastic polymer with low density and good thermal insulation. The porous structure of the material ensures resistance to moisture and chemical inertness.
4. The fourth layer is a foil surface that reflects heat waves, which helps minimize heat loss and increases the thermal insulation of the room.
5. The fifth layer is an adhesive base with high adhesion, providing reliable adhesion to the surface.
6. The sixth layer is a protective film that protects the adhesive layer from drying out and contamination, and is easily removed during installation.

Application: interior finishing work, including decoration of walls in residential and commercial premises, as well as the possibility of use for decorating furniture, doors and other flat surfaces.

Temperature range: Ranges from -20 to +60 degrees, which ensures its ability to operate in a wide range of temperature conditions.

Properties and advantages of the material:

- The advantages of this material include ease of installation due to the self-adhesive layer, which makes the installation process quick and simple without the need for specialists or additional materials. The material is laid joint to joint, is easily cut with scissors or a mounting knife, is not consumed between strips, does not swell or deform.
- It is resistant to water and chemicals due to porous polypropylene, which allows it to be used in rooms with high humidity. The protective PVC film makes it resistant to household detergents, without the need for highly abrasive brushes.
- The insulating properties of the material provide good heat and sound insulation due to its porous structure.
- The flexibility and strength of the material allow it to adapt to various surfaces, even uneven ones, while maintaining its strength.
- Polypropylene is an environmentally friendly material, odorless, stable and recyclable.

Installation:

1. Determine the length of the surface that needs to be covered by calculating the perimeter of the room. For example, if the wall lengths are 5.60 m and 3.20 m, then the perimeter of the room will be P = 5.6 x 2 + 3.2 x 2 = 17.6 m.
2. Divide the resulting perimeter by the length of one plinth (2.8 m), rounding the result up: 17.6 / 2.8 = 6.28, which will round up to 7 pieces.
3. During installation, waste may occur due to the need to trim the baseboard, so it is recommended to add 1-2 additional strips to the calculation.

Surface requirements:

To effectively install skirting boards on an adhesive base, it is necessary to ensure the appropriate condition of the surface on which they will be mounted:

If the wall surface has been painted or covered with another material, it is necessary to apply a primer coat to ensure reliable adhesion.

Care instructions:

Avoid using brushes and sponges with an abrasive effect, as well as detergents with a high concentration of alkalis or acids. To remove dirt, it is recommended to use textile or viscose wipes using mild household chemicals.