Doors with Cortex coating
-
Discount from 5%Price 2192 UAH thingFind out your discount2307 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
Check with the manager for the price and availability of goods!
Reinforced solid door leaf with honeycomb filling.
Such canvases are excellent as second (duplicate) doors after armored doors, interior doors for offices and apartments.
In the production of canvases, only high-quality European materials from leading manufacturers are used.
The sound insulation of a reinforced door is about 30 dB (it is achieved by using a door frame with a seal) in contrast to a leaf with a honeycomb core in which the sound insulation is about 24 dB.
The canvas is equipped with mortgages on both sides, which allow the lock to be installed on both the right and left.
The weight of the reinforced sheets is:
2000x600x40mm - 17.49kg
2000x700x40mm - 19.84kg
2000x800x40mm - 22.86kg
2000x900x40mm - 25.25kg
The fittings for such canvases are standard, with the use of an additional loop for attaching the canvas to the box.
Attention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1.Width of the opening (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2.Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
-
Discount from 5%Price 2233 UAH thingFind out your discount2350 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
Check with the manager for the price and availability of goods!
Reinforced solid door leaf with honeycomb filling.
Such canvases are excellent as second (duplicate) doors after armored doors, interior doors for offices and apartments.
In the production of canvases, only high-quality European materials from leading manufacturers are used.
The sound insulation of a reinforced door is about 30 dB (it is achieved by using a door frame with a seal) in contrast to a leaf with a honeycomb core in which the sound insulation is about 24 dB.
The canvas is equipped with mortgages on both sides, which allow the lock to be installed on both the right and left.
The weight of the reinforced sheets is:
2000x600x40mm - 17.49kg
2000x700x40mm - 19.84kg
2000x800x40mm - 22.86kg
2000x900x40mm - 25.25kg
The fittings for such canvases are standard, with the use of an additional loop for attaching the canvas to the box.
Attention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1.Width of the opening (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2.Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
-
Discount from 5%Price 2233 UAH thingFind out your discount2350 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
Check with the manager for the price and availability of goods!
Reinforced solid door leaf with honeycomb filling.
Such canvases are excellent as second (duplicate) doors after armored doors, interior doors for offices and apartments.
In the production of canvases, only high-quality European materials from leading manufacturers are used.
The sound insulation of a reinforced door is about 30 dB (it is achieved by using a door frame with a seal) in contrast to a leaf with a honeycomb core in which the sound insulation is about 24 dB.
The canvas has mortgages on both sides, which allow you to install the lock on both the right and left.
The weight of the reinforced sheets is:
2000x600x40mm - 17.49kg
2000x700x40mm - 19.84kg
2000x800x40mm - 22.86kg
2000x900x40mm - 25.25kg
The fittings for such canvases are standard, with the use of an additional loop for attaching the canvas to the box.
Attention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1.Width of the opening (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2.Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
-
Discount from 5%Price 2660 UAH thingFind out your discount2800 грнYour
savings5%2000x600x40 2000x700x40 2000x800x40 2000x900x40 Cortex is a new design material that was created specifically for those who value cozy, simple and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care. Vertical - fills with energy all the elements participating in the composition Horizontal - emphasizes the refined taste of the owner of the interior Attention! All measurements must be made by the installer. To select a door leaf, you will need the following data: 1. Opening width (measured at three points and the minimum is selected): for a 600mm wide leaf it should be 680-700mm, for a 700mm wide leaf it should be 780-800mm, for a 800mm wide leaf it should be 880-900mm for for a canvas with a width of 900mm, it should be 980-1000mm 2. Height of the opening (measured at two points and the minimum is selected): For a canvas with a height of 2000mm, it should be 2050-2070mm. To select molded products (box, additional strip and platband), the following data will be required: 1 .Thickness of the opening in which installation is planned (measured at three points and the maximum is selected) 2. Type of frame: Wooden telescopic 80mm: - allows you to cover the thickness of the opening without using an additional strip up to 120mm * - allows you to cover the thickness of the opening using an additional strip "70mm" up to 185mm* - allows you to cover the thickness of the opening with the use of an additional strip "110mm" up to 225mm* Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with a manager is required) Wooden extension strip 80mm: - allows cover the thickness of the opening without the use of an additional strip 80mm - allows you to cover the thickness of the opening using an additional strip "100mm" up to 170mm - allows you to cover the thickness of the opening using an additional strip "150mm" up to 220mm Wooden with an extension 100mm: - allows you to cover the thickness of the opening without using an additional strip 100mm- allows you to block the thickness of the opening using the 100mm of the “100mm” to 190mm, allows you to block the thickness of the opening using the additional plan “150mm” up to 240mm 3. The platband: a rectangular width of 70mmmelescopic width of 80mm and a long legs 25 mm attention and attention! products are produced in pre-prepared openings, after interior work has been carried out. * the size is indicated with two trims extended to the maximumBuy -
Discount from 5%Price 2660 UAH thingFind out your discount2800 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40Check with the manager for the price and availability of goods!
The Cortex Geometry collection is framed panel doors, 40 mm thick.
The frame consists of jointed and glued solid coniferous wood,
Inside the canvas there is honeycomb filler.
The outside of the canvas is lined with HDF board 6mm thick.
Decorative coating – matte white Cortex film.
The ends of the canvas are covered with a 1mm thick PVC edge in the color of the decor.
Features of the paintings Geometry.
Finish: Smooth solid color Cortex film.
Frame: reinforced by using 6mm thick HDF board.
Edge: 1mm thickness, which improves the performance characteristics of the blade.
Visual appearance: abstract milling.Attention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1. Opening width (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2. Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mm
To select molded products (box, additional trim and trim), the following data will be required:1. The thickness of the opening into which installation is planned (measured at three points and the maximum is selected)
2. Box type:
Wooden telescopic 80mm:
- allows you to cover the thickness of the opening without using an additional strip up to 120mm*
- allows you to cover the thickness of the opening using an additional “70mm” strip up to 185mm*
- allows you to cover the thickness of the opening using an additional “110mm” strip up to 225mm*Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with the manager is required)
Wooden for additional 80mm:
- allows you to cover the thickness of the opening without using an additional 80mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 170mm
- allows you to cover the thickness of the opening using an additional 150mm strip up to 220mmWooden for additional 100mm:
- allows you to cover the thickness of the opening without using an additional 100mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 190mm
- allows you to cover the thickness of the opening using an additional “150mm” strip up to 240mm3. Platband type:
Rectangular 70mm wide
Telescopic width 80mm and long leg 25mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
* the size is indicated with two trims extended to the maximum.
Buy -
Discount from 5%Price 2660 UAH thingFind out your discount2800 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
The Cortex Geometry collection is framed panel doors, 40 mm thick.
The frame consists of jointed and glued solid coniferous wood,
Inside the canvas there is honeycomb filler.
The outside of the canvas is lined with HDF board 6mm thick.
Decorative coating – matte white Cortex film.
The ends of the canvas are covered with a 1mm thick PVC edge in the color of the decor.
Features of the paintings Geometry.
Finish: Smooth solid color Cortex film.
Frame: reinforced by using 6mm thick HDF board.
Edge: 1mm thickness, which improves the performance characteristics of the blade.
Visual appearance: abstract milling.Attention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1. Opening width (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2. Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mm
To select molded products (box, additional trim and trim), the following data will be required:1. The thickness of the opening into which installation is planned (measured at three points and the maximum is selected)
2. Box type:
Wooden telescopic 80mm:
- allows you to cover the thickness of the opening without using an additional strip up to 120mm*
- allows you to cover the thickness of the opening using an additional “70mm” strip up to 185mm*
- allows you to cover the thickness of the opening using an additional “110mm” strip up to 225mm*Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with the manager is required)
Wooden for additional 80mm:
- allows you to cover the thickness of the opening without using an additional 80mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 170mm
- allows you to cover the thickness of the opening using an additional 150mm strip up to 220mmWooden for additional 100mm:
- allows you to cover the thickness of the opening without using an additional 100mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 190mm
- allows you to cover the thickness of the opening using an additional “150mm” strip up to 240mm3. Platband type:
Rectangular 70mm wide
Telescopic width 80mm and long leg 25mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
* the size is indicated with two trims extended to the maximum.
-
Discount from 5%Price 2660 UAH thingFind out your discount2800 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
Cortex is a new design material that was created specifically for those who value cozy, strict and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care.
Vertical - fills with energy all elements participating in the composition
Horizontal - emphasizes the refined taste of the owner of the interiorAttention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1. Opening width (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2. Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mm
To select molded products (box, additional trim and trim), the following data will be required:1. The thickness of the opening into which installation is planned (measured at three points and the maximum is selected)
2. Box type:
Wooden telescopic 80mm:
- allows you to cover the thickness of the opening without using an additional strip up to 120mm*
- allows you to cover the thickness of the opening using an additional “70mm” strip up to 185mm*
- allows you to cover the thickness of the opening using an additional “110mm” strip up to 225mm*Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with the manager is required)
Wooden for additional 80mm:
- allows you to cover the thickness of the opening without using an additional 80mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 170mm
- allows you to cover the thickness of the opening using an additional 150mm strip up to 220mmWooden for additional 100mm:
- allows you to cover the thickness of the opening without using an additional 100mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 190mm
- allows you to cover the thickness of the opening using an additional “150mm” strip up to 240mm3. Platband type:
Rectangular 70mm wide
Telescopic width 80mm and long leg 25mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
* the size is indicated with two trims extended to the maximum.
-
Discount from 5%Price 2727 UAH thingFind out your discount2870 грнYour
savings5%2000x600x40 2000x700x40 2000x800x40 2000x900x40 Cortex is a new design material that was created specifically for those who value cozy, simple and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care. Vertical - fills with energy all the elements participating in the composition Horizontal - emphasizes the refined taste of the owner of the interior Attention! All measurements must be made by the installer. To select a door leaf, you will need the following data: 1. Opening width (measured at three points and the minimum is selected): for a 600mm wide leaf it should be 680-700mm, for a 700mm wide leaf it should be 780-800mm, for a 800mm wide leaf it should be 880-900mm for for a canvas with a width of 900mm, it should be 980-1000mm 2. Height of the opening (measured at two points and the minimum is selected): For a canvas with a height of 2000mm, it should be 2050-2070mm. To select molded products (box, additional strip and platband), the following data will be required: 1 .Thickness of the opening in which installation is planned (measured at three points and the maximum is selected) 2. Type of frame: Wooden telescopic 80mm: - allows you to cover the thickness of the opening without using an additional strip up to 120mm * - allows you to cover the thickness of the opening using an additional strip "70mm" up to 185mm* - allows you to cover the thickness of the opening with the use of an additional strip "110mm" up to 225mm* Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with a manager is required) Wooden extension strip 80mm: - allows cover the thickness of the opening without the use of an additional strip 80mm - allows you to cover the thickness of the opening using an additional strip "100mm" up to 170mm - allows you to cover the thickness of the opening using an additional strip "150mm" up to 220mm Wooden with an extension 100mm: - allows you to cover the thickness of the opening without using an additional strip 100mm- allows you to block the thickness of the opening using the 100mm of the “100mm” to 190mm, allows you to block the thickness of the opening using the additional plan “150mm” up to 240mm 3. The platband: a rectangular width of 70mmmelescopic width of 80mm and a long legs 25 mm attention and attention! products are produced in pre-prepared openings, after interior work has been carried out. * the size is indicated with two trims extended to the maximumBuy -
Discount from 5%Price 2727 UAH thingFind out your discount2870 грнYour
savings5%2000x600x40 2000x700x40 2000x800x40 2000x900x40 Cortex is a new design material that was created specifically for those who value cozy, simple and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care. Vertical - fills with energy all the elements participating in the composition Horizontal - emphasizes the refined taste of the owner of the interior Attention! All measurements must be made by the installer. To select a door leaf, you will need the following data: 1. Opening width (measured at three points and the minimum is selected): for a 600mm wide leaf it should be 680-700mm, for a 700mm wide leaf it should be 780-800mm, for a 800mm wide leaf it should be 880-900mm for for a canvas with a width of 900mm, it should be 980-1000mm 2. Height of the opening (measured at two points and the minimum is selected): For a canvas with a height of 2000mm, it should be 2050-2070mm. To select molded products (box, additional strip and platband), the following data will be required: 1 .Thickness of the opening in which installation is planned (measured at three points and the maximum is selected) 2. Type of frame: Wooden telescopic 80mm: - allows you to cover the thickness of the opening without using an additional strip up to 120mm * - allows you to cover the thickness of the opening using an additional strip "70mm" up to 185mm* - allows you to cover the thickness of the opening with the use of an additional strip "110mm" up to 225mm* Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with a manager is required) Wooden extension strip 80mm: - allows cover the thickness of the opening without the use of an additional strip 80mm - allows you to cover the thickness of the opening using an additional strip "100mm" up to 170mm - allows you to cover the thickness of the opening using an additional strip "150mm" up to 220mm Wooden with an extension 100mm: - allows you to cover the thickness of the opening without using an additional strip 100mm- allows you to block the thickness of the opening using the 100mm of the “100mm” to 190mm, allows you to block the thickness of the opening using the additional plan “150mm” up to 240mm 3. The platband: a rectangular width of 70mmmelescopic width of 80mm and a long legs 25 mm attention and attention! products are produced in pre-prepared openings, after interior work has been carried out. * the size is indicated with two trims extended to the maximumBuy -
Discount from 5%Price 2727 UAH thingFind out your discount2870 грнYour
savings5%2000x600x40 2000x700x40 2000x800x40 2000x900x40 Cortex is a new design material that was created specifically for those who value cozy, simple and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care. Vertical - fills with energy all the elements participating in the composition Horizontal - emphasizes the refined taste of the owner of the interior Attention! All measurements must be made by the installer. To select a door leaf, you will need the following data: 1. Opening width (measured at three points and the minimum is selected): for a 600mm wide leaf it should be 680-700mm, for a 700mm wide leaf it should be 780-800mm, for a 800mm wide leaf it should be 880-900mm for for a canvas with a width of 900mm, it should be 980-1000mm 2. The height of the opening (measured at two points and the minimum is selected): For a canvas with a height of 2000mm, it should be 2050-2070mm. To select molded products (box, additional strip and platband), the following data will be required: 1 .Thickness of the opening in which installation is planned (measured at three points and the maximum is selected) 2. Type of frame: Wooden telescopic 80mm: - allows you to cover the thickness of the opening without using an additional strip up to 120mm * - allows you to cover the thickness of the opening using an additional strip "70mm" up to 185mm* - allows you to cover the thickness of the opening with the use of an additional strip "110mm" up to 225mm* Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with a manager is required) Wooden extension strip 80mm: - allows cover the thickness of the opening without the use of an additional strip 80mm - allows you to cover the thickness of the opening with the use of an additional strip "100mm" up to 170mm - allows you to cover the thickness of the opening using an additional strip "150mm" up to 220mm Wooden for an extension 100mm: - allows you to cover the thickness of the opening without using an additional strip 100mm- allows you to block the thickness of the opening using the 100mm of the “100mm” to 190mm, allows you to block the thickness of the opening using the additional plan “150mm” up to 240mm 3. The platband: a rectangular width of 70mmmelescopic width of 80mm and a long legs 25 mm attention and attention! products are produced in pre-prepared openings, after interior work has been carried out. * the size is indicated with two trims extended to the maximumBuy -
Discount from 5%Price 2727 UAH thingFind out your discount2870 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
Cortex is a new design material that was created specifically for those who value cozy, strict and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care.
Vertical - fills with energy all elements participating in the composition
Horizontal - emphasizes the refined taste of the owner of the interiorAttention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1. Opening width (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2. Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mm
To select molded products (box, additional trim and trim), the following data will be required:1. The thickness of the opening into which installation is planned (measured at three points and the maximum is selected)
2. Box type:
Wooden telescopic 80mm:
- allows you to cover the thickness of the opening without using an additional strip up to 120mm*
- allows you to cover the thickness of the opening using an additional “70mm” strip up to 185mm*
- allows you to cover the thickness of the opening using an additional “110mm” strip up to 225mm*Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with the manager is required)
Wooden for additional 80mm:
- allows you to cover the thickness of the opening without using an additional 80mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 170mm
- allows you to cover the thickness of the opening using an additional 150mm strip up to 220mmWooden for additional 100mm:
- allows you to cover the thickness of the opening without using an additional 100mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 190mm
- allows you to cover the thickness of the opening using an additional “150mm” strip up to 240mm3. Platband type:
Rectangular 70mm wide
Telescopic width 80mm and long leg 25mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
* the size is indicated with two trims extended to the maximum.
-
Discount from 5%Price 2774 UAH thingFind out your discount2920 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
Cortex is a new design material that was created specifically for those who value cozy, strict and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care.
Vertical - fills with energy all elements participating in the composition
Horizontal - emphasizes the refined taste of the owner of the interiorChS - canvas with black glass.
Attention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1. Opening width (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2. Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mm
To select molded products (box, additional trim and trim), the following data will be required:1. The thickness of the opening into which installation is planned (measured at three points and the maximum is selected)
2. Box type:
Wooden telescopic 80mm:
- allows you to cover the thickness of the opening without using an additional strip up to 120mm*
- allows you to cover the thickness of the opening using an additional “70mm” strip up to 185mm*
- allows you to cover the thickness of the opening using an additional “110mm” strip up to 225mm*Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with the manager is required)
Wooden for additional 80mm:
- allows you to cover the thickness of the opening without using an additional 80mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 170mm
- allows you to cover the thickness of the opening using an additional 150mm strip up to 220mmWooden for additional 100mm:
- allows you to cover the thickness of the opening without using an additional 100mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 190mm
- allows you to cover the thickness of the opening using an additional “150mm” strip up to 240mm3. Platband type:
Rectangular 70mm wide
Telescopic width 80mm and long leg 25mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
* the size is indicated with two trims extended to the maximum.
-
Discount from 5%Price 2841 UAH thingFind out your discount2990 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
Cortex is a new design material that was created specifically for those who value cozy, strict and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care.
Vertical - fills with energy all elements participating in the composition
Horizontal - emphasizes the refined taste of the owner of the interiorAttention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1. Opening width (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2. Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mm
To select molded products (box, additional trim and trim), the following data will be required:1. The thickness of the opening into which installation is planned (measured at three points and the maximum is selected)
2. Box type:
Wooden telescopic 80mm:
- allows you to cover the thickness of the opening without using an additional strip up to 120mm*
- allows you to cover the thickness of the opening using an additional “70mm” strip up to 185mm*
- allows you to cover the thickness of the opening using an additional “110mm” strip up to 225mm*Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with the manager is required)
Wooden for additional 80mm:
- allows you to cover the thickness of the opening without using an additional 80mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 170mm
- allows you to cover the thickness of the opening using an additional 150mm strip up to 220mmWooden for additional 100mm:
- allows you to cover the thickness of the opening without using an additional 100mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 190mm
- allows you to cover the thickness of the opening using an additional “150mm” strip up to 240mm3. Platband type:
Rectangular 70mm wide
Telescopic width 80mm and long leg 25mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
* the size is indicated with two trims extended to the maximum.
-
Discount from 5%Price 2850 UAH thingFind out your discount3000 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
The Cortex Geometry collection is framed panel doors, 40 mm thick.
The frame consists of jointed and glued solid coniferous wood,
Inside the canvas there is honeycomb filler.
The outside of the canvas is lined with HDF board 6mm thick.
Decorative coating – matte white Cortex film.
The ends of the canvas are covered with a 1mm thick PVC edge in the color of the decor.
Features of the paintings Geometry.
Finish: Smooth solid color Cortex film.
Frame: reinforced by using 6mm thick HDF board.
Edge: 1mm thickness, which improves the performance characteristics of the blade.
Visual appearance: abstract milling.Attention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1. Opening width (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2. Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mm
To select molded products (box, additional trim and trim), the following data will be required:1. The thickness of the opening into which installation is planned (measured at three points and the maximum is selected)
2. Box type:
Wooden telescopic 80mm:
- allows you to cover the thickness of the opening without using an additional strip up to 120mm*
- allows you to cover the thickness of the opening using an additional “70mm” strip up to 185mm*
- allows you to cover the thickness of the opening using an additional “110mm” strip up to 225mm*Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with the manager is required)
Wooden for additional 80mm:
- allows you to cover the thickness of the opening without using an additional 80mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 170mm
- allows you to cover the thickness of the opening using an additional 150mm strip up to 220mmWooden for additional 100mm:
- allows you to cover the thickness of the opening without using an additional 100mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 190mm
- allows you to cover the thickness of the opening using an additional “150mm” strip up to 240mm3. Platband type:
Rectangular 70mm wide
Telescopic width 80mm and long leg 25mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
* the size is indicated with two trims extended to the maximum.
-
Discount from 5%Price 2850 UAH thingFind out your discount3000 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
The Cortex Geometry collection is framed panel doors, 40 mm thick.
The frame consists of jointed and glued solid coniferous wood,
Inside the canvas there is honeycomb filler.
The outside of the canvas is lined with HDF board 6mm thick.
Decorative coating – matte white Cortex film.
The ends of the canvas are covered with a 1mm thick PVC edge in the color of the decor.
Features of the paintings Geometry.
Finish: Smooth solid color Cortex film.
Frame: reinforced by using 6mm thick HDF board.
Edge: 1mm thickness, which improves the performance characteristics of the blade.
Visual appearance: abstract milling.Attention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1. Opening width (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2. Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mm
To select molded products (box, additional trim and trim), the following data will be required:1. The thickness of the opening into which installation is planned (measured at three points and the maximum is selected)
2. Box type:
Wooden telescopic 80mm:
- allows you to cover the thickness of the opening without using an additional strip up to 120mm*
- allows you to cover the thickness of the opening using an additional “70mm” strip up to 185mm*
- allows you to cover the thickness of the opening using an additional “110mm” strip up to 225mm*Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with the manager is required)
Wooden for additional 80mm:
- allows you to cover the thickness of the opening without using an additional 80mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 170mm
- allows you to cover the thickness of the opening using an additional 150mm strip up to 220mmWooden for additional 100mm:
- allows you to cover the thickness of the opening without using an additional 100mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 190mm
- allows you to cover the thickness of the opening using an additional “150mm” strip up to 240mm3. Platband type:
Rectangular 70mm wide
Telescopic width 80mm and long leg 25mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
* the size is indicated with two trims extended to the maximum.
-
Discount from 5%Price 2926 UAH thingFind out your discount3080 грнYour
savings5%2000x600x40 2000x700x40 2000x800x40 2000x900x40 Cortex is a new design material that was created specifically for those who value cozy, simple and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care. Vertical - fills with energy all the elements participating in the composition Horizontal - emphasizes the refined taste of the owner of the interior Attention! All measurements must be made by the installer. To select a door leaf, you will need the following data: 1. Opening width (measured at three points and the minimum is selected): for a 600mm wide leaf it should be 680-700mm, for a 700mm wide leaf it should be 780-800mm, for a 800mm wide leaf it should be 880-900mm for for a canvas with a width of 900mm, it should be 980-1000mm 2. Height of the opening (measured at two points and the minimum is selected): For a canvas with a height of 2000mm, it should be 2050-2070mm. To select molded products (box, additional strip and platband), the following data will be required: 1 .Thickness of the opening in which installation is planned (measured at three points and the maximum is selected) 2. Type of frame: Wooden telescopic 80mm: - allows you to cover the thickness of the opening without using an additional strip up to 120mm * - allows you to cover the thickness of the opening using an additional strip "70mm" up to 185mm* - allows you to cover the thickness of the opening with the use of an additional strip "110mm" up to 225mm* Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with a manager is required) Wooden extension strip 80mm: - allows cover the thickness of the opening without the use of an additional strip 80mm - allows you to cover the thickness of the opening using an additional strip "100mm" up to 170mm - allows you to cover the thickness of the opening using an additional strip "150mm" up to 220mm Wooden with an extension 100mm: - allows you to cover the thickness of the opening without using an additional strip 100mm- allows you to block the thickness of the opening using the 100mm of the “100mm” to 190mm, allows you to block the thickness of the opening using the additional plan “150mm” up to 240mm 3. The platband: a rectangular width of 70mmmelescopic width of 80 mm and a long legs 25 mm attention! Installation of door leaflets and praisins products are produced in pre-prepared openings, after interior work has been carried out. * the size is indicated with two trims extended to the maximumBuy -
Discount from 5%Price 2926 UAH thingFind out your discount3080 грнYour
savings5%2000x600x40 2000x700x40 2000x800x40 2000x900x40 Cortex is a new design material that was created specifically for those who value cozy, simple and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care. Vertical - fills with energy all the elements participating in the composition Horizontal - emphasizes the refined taste of the owner of the interior Attention! All measurements must be made by the installer. To select a door leaf, you will need the following data: 1. Opening width (measured at three points and the minimum is selected): for a 600mm wide leaf it should be 680-700mm, for a 700mm wide leaf it should be 780-800mm, for a 800mm wide leaf it should be 880-900mm for for a canvas with a width of 900mm, it should be 980-1000mm 2. The height of the opening (measured at two points and the minimum is selected): For a canvas with a height of 2000mm, it should be 2050-2070mm. To select molded products (box, additional strip and platband), the following data will be required: 1 .Thickness of the opening in which installation is planned (measured at three points and the maximum is selected) 2. Type of frame: Wooden telescopic 80mm: - allows you to cover the thickness of the opening without using an additional strip up to 120mm * - allows you to cover the thickness of the opening using an additional strip "70mm" up to 185mm* - allows you to cover the thickness of the opening with the use of an additional strip "110mm" up to 225mm* Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with a manager is required) Wooden extension strip 80mm: - allows cover the thickness of the opening without the use of an additional strip 80mm - allows you to cover the thickness of the opening with the use of an additional strip "100mm" up to 170mm - allows you to cover the thickness of the opening using an additional strip "150mm" up to 220mm Wooden for an extension 100mm: - allows you to cover the thickness of the opening without using an additional strip 100mm- allows you to block the thickness of the opening using the 100mm of the “100mm” to 190mm, allows you to block the thickness of the opening using the additional plan “150mm” up to 240mm 3. The platband: a rectangular width of 70mmmelescopic width of 80mm and a long legs 25 mm attention and attention! products are produced in pre-prepared openings, after interior work has been carried out. * the size is indicated with two trims extended to the maximumBuy -
Discount from 5%Price 2926 UAH thingFind out your discount3080 грнYour
savings5%2000x600x40 2000x700x40 2000x800x40 2000x900x40 Cortex is a new design material that was created specifically for those who value cozy, simple and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care. Vertical - fills with energy all the elements participating in the composition Horizontal - emphasizes the refined taste of the owner of the interior Attention! All measurements must be made by the installer. To select a door leaf, you will need the following data: 1. Opening width (measured at three points and the minimum is selected): for a 600mm wide leaf it should be 680-700mm, for a 700mm wide leaf it should be 780-800mm, for a 800mm wide leaf it should be 880-900mm for for a canvas with a width of 900mm, it should be 980-1000mm 2. Height of the opening (measured at two points and the minimum is selected): For a canvas with a height of 2000mm, it should be 2050-2070mm. To select molded products (box, additional strip and platband), the following data will be required: 1 .Thickness of the opening in which installation is planned (measured at three points and the maximum is selected) 2. Type of frame: Wooden telescopic 80mm: - allows you to cover the thickness of the opening without using an additional strip up to 120mm * - allows you to cover the thickness of the opening using an additional strip "70mm" up to 185mm* - allows you to cover the thickness of the opening with the use of an additional strip "110mm" up to 225mm* Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with a manager is required) Wooden extension strip 80mm: - allows cover the thickness of the opening without the use of an additional strip 80mm - allows you to cover the thickness of the opening using an additional strip "100mm" up to 170mm - allows you to cover the thickness of the opening using an additional strip "150mm" up to 220mm Wooden with an extension 100mm: - allows you to cover the thickness of the opening without using an additional strip 100mm- allows you to block the thickness of the opening using the 100mm of the “100mm” to 190mm, allows you to block the thickness of the opening using the additional plan “150mm” up to 240mm 3. The platband: a rectangular width of 70mmmelescopic width of 80 mm and a long legs 25 mm attention! Installation of door leaflets and praisins products are produced in pre-prepared openings, after interior work has been carried out. * the size is indicated with two trims extended to the maximumBuy -
Discount from 5%Price 2964 UAH thingFind out your discount3120 грнYour
savings5%2000x600x40
2000x700x40
2000x800x40
2000x900x40BuyCheck with the manager for the price and availability of goods!
Cortex is a new design material that was created specifically for those who value cozy, strict and stylish interiors. The coating is resistant to various types of mechanical damage. The doors perfectly resist moisture, are practical to use and do not require special care.
Vertical - fills with energy all elements participating in the composition
Horizontal - emphasizes the refined taste of the owner of the interiorAttention! All measurements must be made by the installer.
To select a door leaf, you will need the following data:
1. Opening width (measured at three points and the minimum is selected):
for a canvas with a width of 600mm it should be 680-700mm
for a canvas with a width of 700mm it should be 780-800mm
for a canvas with a width of 800mm it should be 880-900mm
for a canvas with a width of 900mm it should be 980-1000mm2. Height of the opening (measured at two points and the minimum is selected):
For a canvas with a height of 2000mm it should be 2050-2070mm
To select molded products (box, additional trim and trim), the following data will be required:1. The thickness of the opening into which installation is planned (measured at three points and the maximum is selected)
2. Box type:
Wooden telescopic 80mm:
- allows you to cover the thickness of the opening without using an additional strip up to 120mm*
- allows you to cover the thickness of the opening using an additional “70mm” strip up to 185mm*
- allows you to cover the thickness of the opening using an additional “110mm” strip up to 225mm*Attention! If the thickness of the wall that needs to be covered is greater than indicated above, then you can use several telescopic additional strips (consultation with the manager is required)
Wooden for additional 80mm:
- allows you to cover the thickness of the opening without using an additional 80mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 170mm
- allows you to cover the thickness of the opening using an additional 150mm strip up to 220mmWooden for additional 100mm:
- allows you to cover the thickness of the opening without using an additional 100mm strip
- allows you to cover the thickness of the opening using an additional “100mm” strip up to 190mm
- allows you to cover the thickness of the opening using an additional “150mm” strip up to 240mm3. Platband type:
Rectangular 70mm wide
Telescopic width 80mm and long leg 25mmAttention! Installation of door leaves and moldings is carried out in pre-prepared openings, after interior work has been carried out.
* the size is indicated with two trims extended to the maximum.
-
Discount from 5%Price 2979 UAH thingFind out your discount3136 грнYour
savings5%2000x600x34 2000x700x34 2000x800x34 2000x900x34Buy
- We are manufacturer's representatives This allows us to keep the lowest prices on the market
- Delivery in Kiev is absolutely free For orders over UAH 1500, and we will deliver your orders to Ukraine by Nova Poshta, Delivery and Autolux
- Current promotions and discounts for all customers We love to please our customers with pleasant surprises and maximum discounts
- Excellent quality of the entire range of products Our online showcase is presented with goods of impeccable original quality
- Free delivery!
- Free delivery of your order over 5000 hryvnia
within a few days. Check the conditions with our managers. - Find out all the details
All Kiev — free of charge within 2-3 days
For orders of bulky goods (excluding goods with additional discounts or promotional items)
over UAH 5000, free delivery to Kiev is available. If the order is bulky, then delivery is only paid, and will be from UAH 350.
Suburbs of Kiev for orders over UAH 7000. (excluding goods with additional discounts or promotional items) — Chaika, Irpen, Vishnevoe, Borshchagovka, Kryukovshchina, Gatne, Vasylkiv, Vyshhorod, Bortnichi, Boryspil and any other district.
Delivery across Ukraine by Nova Poshta or Delivery carriers from UAH 100, and depends on the size of the ordered item.
If you are more comfortable picking up your order yourself, no problem, after placing an order you can come to our address, see and pick up your order.
Polyurethane skirting Orac Decor SX137
Decorative beams
Decorative fireplace Harmony FP1103
Children's
Isoplaat underlay quiet running 5 mm
Moldings
Ulf Moritz inserts and elements
Ceiling decor
Primehouse ready-made roller blinds
Window sill Danke
3D WallArt Tetris panel
Liquid wallpaper
Photo wallpaper
Cornice flexible profile
Photo curtains
