3D MDF Wall Panel Neman 117x2780x12 mm Scandi

Please note: starter and finishing strips are sold separately. The actual color of the panels may differ slightly from the one shown in the photo.

3D MDF Wall Panels — Textured Design for Contemporary Interiors

Turn an ordinary wall into a distinctive interior feature. Decorative 3D MDF panels create a sculpted surface that adds depth and draws the eye. Use them across an entire wall or to highlight a specific area, such as a TV wall, a headboard backdrop or a dining space.

Each panel is made from 12 mm MDF and measures 117 x 2780 x 12 mm. The elongated format creates a repeating visual rhythm, while vertical installation helps emphasise the height of a room. Lighting from the side brings out the relief, revealing the interplay of light and shadow across the surface.

Where to Use Them

The panels are suitable for decorative wall finishes in dry residential and commercial interiors:
• living rooms — for a feature wall, TV area or backdrop behind a sofa;
• bedrooms — for the wall behind a bed;
• entrance halls and corridors — to highlight selected wall sections;
• home offices and workplaces — for work areas and meeting rooms;
• shops, showrooms, reception areas and hotel rooms — for decorative wall compositions;
• dining rooms or kitchen dining areas — away from water, steam and heat sources.

Depending on the chosen colour and texture, the panels can be paired with painted walls, wallpaper, decorative plaster, wood and stone. They work well in contemporary, minimalist, Scandinavian and industrial-style interiors.

Key Benefits

• Dimensional design. The sculpted surface adds visual interest without the need for additional wall decorations.
• Coordinated joints. A tongue-and-groove system helps align and join adjacent panels.
• Neatly finished edges. Starter and finishing trims complete the installation.
• Flexible fixing options. Panels can be installed with adhesive or mechanical fixings, depending on the substrate and the manufacturer’s guidance.
• A solution for uneven walls. Installation on a levelled batten framework can conceal imperfections in the underlying wall.
• Simple care. A soft dry or slightly damp cloth is sufficient for routine cleaning.

Installation

Prepare a tape measure, spirit level, jigsaw or suitable trimming saw, along with the tools and materials required for your chosen fixing method: MDF-compatible adhesive, a suitable construction adhesive, screws or clips. Use a drill/driver or construction stapler only where the installation system allows the corresponding fixing method.

1. Clean and dry the substrate. Walls must be level for adhesive installation. If a framework is needed, fit and level the battens first.
2. Check the surface with a spirit level and mark out the panel layout.
3. Secure the starter trim on the left-hand side of the installation.
4. Insert the first panel into the starter trim groove and secure it using the selected method. For concealed mechanical fixings, use the fixing area provided by the groove design.
5. Install the remaining panels in sequence, joining them with the tongue-and-groove system and checking alignment as you go.
6. Trim the final panel if necessary, then fit the finishing trim.

The recommended installation temperature is +15 to +25 °C. Consult the panel and installation-material manufacturers’ instructions for fixing specifications, adhesive coverage, required clearances and other installation details.

Use and Care

These panels are intended for dry indoor spaces. Installation in bathrooms, saunas and other high-humidity areas is not recommended. Avoid direct contact with water and prolonged wetting of the surface.

Remove dust with a soft cloth and wipe away light marks with a slightly damp cloth. Do not use abrasive cleaners. If improved acoustic comfort is required, a compatible acoustic backing may be considered as part of the wall assembly. Its effectiveness depends on the complete construction and is not a verified performance rating of the panels themselves.

From a subtle focal point to a complete textured feature wall, 3D MDF panels offer a distinctive way to personalise an interior.