Finishing trim Neman for 3D MDF panels 38x12x2780 mm Scandi

Please note: the actual color of the finishing strip may vary slightly from the color shown in the photo.

Neman Finishing Trim for 3D MDF Wall Panels, 38 x 12 x 2780 mm

A neat finishing touch for a decorative wall

The Neman finishing trim completes the exposed edge of a 3D MDF wall panel installation. Fitted alongside the final panel, it covers the edge of the assembly and gives the wall a finished appearance. It creates a clean boundary between the textured panelling and the surrounding wall, making it particularly useful for panel arrangements with an exposed side.

Made from MDF, the trim measures 38 mm wide, 12 mm thick and 2780 mm long. It can be cut to suit the height of the section being finished. Choose a trim decor that complements your panels for a coordinated result.

Where to use it

Designed for interior use in dry rooms, this finishing trim suits panel installations in living rooms, bedrooms, hallways and home offices. Use it to complete the edge of a TV feature wall, a decorative section behind a bed or panelling around a workspace. It also provides a neat finish for decorative wall sections in offices and reception areas.

Key benefits

• Covers the edge of the final panel for a tidy outline.
• Completes both large panelled walls and smaller decorative sections.
• Complements the Neman 3D MDF wall panel system.
• Can be cut to length using a saw or jigsaw.
• Requires only simple routine cleaning.

Installation

Prepare a flat, dry and clean surface before installation. Fit a batten framework if needed and check that it is level. Assemble the wall covering from the starter trim, joining the panels in sequence using their tongue-and-groove connections.

Install the finishing trim at the final stage, once the last panel has been fitted to size. Dry-fit the trim, check how the components meet and cut it to length if required. Select an MDF-compatible adhesive or another fixing method specified for the system according to the substrate and panel installation instructions. The recommended installation temperature is +15 to +25 °C.

Care and use

Clean with a soft, dry or slightly damp cloth. Avoid abrasive cleaning products and excessive wetting. The trim is not recommended for high-humidity spaces, including bathrooms and saunas.