Wall panel 3D Sticker wall 700x700x4mm inscription with silver (D) SW-00001980

Wall panel 3D Sticker wall 700x700x4mm inscription with silver (D) SW-00001980

Decorate the walls of your home with self-adhesive 3D panels - a simple and affordable solution for creating a stylish and modern interior.

Lightweight and durable panels made of porous polypropylene (PPP) with a relief pattern will transform any room. The self-adhesive base ensures quick and easy installation without the use of additional materials.

The multilayer structure of the panels guarantees their durability and practicality:

- PVC film: resistant to chemicals, flexible and lightweight.
- Decorative layer: high-quality printing while maintaining color saturation.
- PPP core layer: provides thermal insulation, low weight, moisture resistance and chemical inertness.
- Adhesive layer: non-toxic, with high adhesion.
- Protective paper: easily removed before installation.

Advantages of 3D panels:

1. Easy to install: no glue, nails or tools.
2. Stylish design: realistic imitation brickwork in rich colors.
3. Practicality: moisture-proof, easy to clean, fade-resistant.
4. Affordability: good value for money.

Calculation of the required number of panels:

1. Measure the length and width of the surface to be pasted.
2. Multiply the length by the width of each surface in meters and add up the results to get the area. For example, after measurements you received:

- Wall length 3.7 m.
- Wall width 2.7 m. 3.7 * 2.7 = 9.99 sq.m

3. The resulting area must be divided by the area of one panel (700*700= 0.49 sq.m) and rounded up: 9.99/0.49=20.38 rounded to 21.

During the installation process, waste associated with cutting panels may arise, so it is recommended to add 1-2 spare pieces to the calculation.

Installation of panels: step-by-step instructions

Preparation

1. Clean and level the surface: Make sure the surface on which you will attach the panels is clean, dry and level. Remove dust, dirt, grease and, if necessary, level the surface. To ensure optimal adhesion, panels and surface should be at room temperature.
2. Peel off the protective film: Peel off the protective paper from the back of the self-adhesive panel to expose the adhesive surface.

Installation

3. Start at a Corner: Start installation at one corner and gently press the panel into the surface. Make sure the panel is installed smoothly and without air bubbles or wrinkles.
4. Fitting panels: Use a knife or scissors to trim panels to size, especially in corners and along surface edges.
5. Press the panels: Press the panels firmly onto the surface to ensure a secure adhesion.

Adviсe

- For best results, use a level to ensure the panels are level.
- If you are not confident in your abilities, seek help from a professional.