Decorative wall PS strip Sticker wall 120*2900*12mm (D) SW-00001742

Decorative wall PS strip Sticker wall 120*2900*12mm (D) SW-00001742 is a decorative element for finishing interior walls, imitating wood texture. PS wall lath is made of polystyrene and consists of three layers: protective, decorative and main. Features: - Length: 290. - Thickness: 1.2 cm. - Width: 12 cm. Temperature range: Polystyrene (PS) is a thermoplastic material that can withstand a wide range of temperatures. Depending on the composition, PS can withstand temperatures from -20°C to +70°C or more. To give PS heat-resistant properties, special additives can be added to its composition. The main advantages of wall slats: - Impact resistance. - Lightness. - Water resistance. - Safety. - Aesthetics. Slats can be used to decorate walls in residential and commercial spaces, as well as furniture, doors and other flat surfaces. Calculation of the required material: 1. Measure the length and height of the surface to be covered. 2. Multiply the length by the height in meters for each surface and add the results to obtain the area. 3. Divide the total area by the area of one batten, rounding up. Installation instructions: 1. Prepare the surface for mounting the slats. 2. Use a circular saw or jigsaw to cut the slats. 3. Secure the rail to the desired surface using mounting adhesive. 4. The slats can be installed vertically or horizontally. They can also be secured with a construction stapler. Care instructions: - Avoid using brushes and sponges with an abrasive effect. - To remove dirt, use soft textile or viscose wipes with mild household chemicals.