Decorative wall strip Sticker wall SW-00001531

Material: WPC (wood-polymer composite), this is a mixture of materials including wood and polymer components. Dimensions: 3000x160x23 mm. Weight: 2.46 kg. Surface: smooth. Visually imitates the texture of wooden rails. Application: intended for interior wall decoration. Material characteristics: - Resistant to moisture. - Resists mechanical stress. - Resistant to bacteria and insects. - Not subject to fire. - Retains its characteristics during temperature fluctuations. - Able to maintain its properties in the range from -50 to +80 degrees. Main advantages: - Suitable for use in bathrooms. - Does not emit toxic substances. - Does not have an unpleasant odor. - Easy to clean. - Light weight. - Suitable for both residential and non-residential premises. Layers: 1. Color film. 2. Wood-polymer composite. Required tools and components for installing PVC products: 1. Leveling tool (level). 2. Ruler. 3. Electric planer (or grinder). 4. Adhesive based on silicone or acrylic. 5. Marker or pencil. Installation: 1. Glue the material only on a flat wall. 2. Before starting installation, do not forget to prime the surface. 3. Level at the desired height using a level to ensure the material sits level. 4. Cover the back side of the panel with glue in a uniform layer 1.5-2 mm thick and place the panel with the back side facing the surface. 5. Carefully press the panel against the wall in accordance with the level, holding in this position for about 2 minutes, then you can move on to the next panel. Continue installing the next panel by following these steps: 1. Cover the back of the next panel with adhesive as described in step four. 2. Place the panel against the wall so that it fits snugly against the previous panel and insert it into the groove. 3. Carefully press the panel against the wall, ensuring a tight fit, and hold in this position for 2 minutes.