Self-adhesive vinyl tile Sticker wall 152.4х914.4х1.5мм Мат (D) SW-00002968

Self-adhesive vinyl tile Sticker wall 152.4х914.4х1.5мм Мат (D) SW-00002968 — a modern flooring solution that combines strength, moisture resistance and wear resistance. Thanks to the adhesive base, the tile is easy to install without any extra effort. Realistic wood or stone designs will perfectly complement any interior. It also provides excellent heat and sound insulation, does not require complex maintenance and is environmentally friendly.

Material: polyvinyl chloride (PVC).
Dimensions: 152 x 914 x 1.5 mm.
Coverage area: 152 x 914 mm – 0.138 sq.m, quantity per 1 sq.m – 8 units.
Surface: smooth matte, with imitation of natural materials.

Laminate tiles have a multilayer structure, which includes:

• Protective polymer layer - resists scratches, UV radiation and retains color.
• Decorative layer - realistic image of natural materials.
• Main layer of foamed PVC - lightness, strength, chemical and impact resistance.
• Foil layer - effective thermal insulation.
• Adhesive layer - reliable, non-toxic fastening.
• Siliconized paper - preserves glue until installation.

Temperature regime:

The tile may deform under the influence of high temperatures. In the area of the stove or oven, it is recommended to maintain a distance of 30–50 cm during installation.

Applications:

Ideal for decorating floors, walls, furniture, doors and other flat surfaces in residential (kitchen, bathroom, living room, bedroom) and commercial spaces (offices, shops, salons, gyms, workshops, etc.).

Advantages of vinyl tiles for laminate:

• Easy installation: light weight, adhesive base, installation without gaps, only 1% trimming.
• Moisture resistance: not afraid of steam, moisture and mold.
• Durability: protection against scratches, impacts and UV radiation.
• Aesthetics: realistic designs under wood and stone, easy to combine.
• Easy care: easy to clean, individual tiles can be replaced.
• Sound insulation: reduces noise levels in the room.
• Environmental friendliness: safe for people and the environment, made of environmentally friendly materials.

How to calculate the number of tiles:

1. Measure the length and width of the surface in meters.
2. Multiply these values to find out the area (for example: 5.6 m x 3.2 m = 17.92 sq.m).
3. Divide the total area by the area of one tile (152x914 mm = 0.138 sq.m). For example: 17.92 / 0.138 = 130 tiles (round up).
4. Add 2–3 extra tiles for trimming and unforeseen situations during installation.

Vinyl tile installation instructions:

• Tiles can be laid on: linoleum, tile, parquet, laminate, paint, glass, primed concrete with minor irregularities. You can not glue on whitewash - it must be completely removed.
• The air temperature in the room should not be lower than +15 degrees.
• The base should be clean, dry, even. Remove dust, grease and dirt. If necessary, level with a primer (drying - at least 4 hours).
• Before laying, the tile should be at room temperature.

Installation:

1. Remove the protective layer from the back of the tile.
2. Start laying from the corner. Press the tile tightly, without bubbles.
3. Trim the tile with a knife or scissors if necessary.
4. Join the next tile tightly, removing the protective layer gradually.
5. Press each tile down with your hand or a rubber roller to ensure a secure bond.

Partial repairs:

• Remove the damaged tile with a knife or spatula.
• Lay a new tile, removing the protective layer, and press firmly to the surface.