Self-adhesive aluminum tiles Sticker wall silver and gold chess 300x300x3mm SW-00001827 (D)

Self-adhesive aluminum tiles Sticker wall silver and gold chess 300x300x3mm SW-00001827 (D) - this is a modern and practical material for finishing walls and other surfaces. It consists of square panels measuring 300x300x3mm, made of aluminum with a protective coating. An adhesive base is applied to the back of the panels, which ensures simple and quick installation without the use of additional tools.

Dimensions: 300x300x3mm.
Weight: 1 tile 200 grams.
Texture: quite smooth, but there is a 3D visual effect, not gloss, there is a slight pearlescent shine.

Advantages:

1. Easy installation: The tiles are easily glued to any flat surface, without requiring preliminary preparation.
2. Moisture resistance: The material is not afraid of water and steam, so it is suitable for use in bathrooms, kitchens and other rooms with high humidity.
3. Durability: Aluminum tiles are resistant to mechanical damage, scratches and fading.
4. Hygiene: The surface of the tile is easy to clean and does not absorb odors.
5. Decorative: A wide selection of colors and textures allows you to create a stylish and unique interior.

Application:

Self-adhesive aluminum Sticker Wall tiles can be used to decorate:

- Walls in the kitchen, bathroom, living room, bedroom, hallway and other rooms.
- An apron in the kitchen.
- Furniture facades.
- Decorative elements.

Material:

1. Protective layer:

- Polymer coating resistant to abrasion, scratches and moisture.
- Maintains the aesthetic appearance of the tiles.
- Transparent or colored, with a matte surface.

2. Aluminum plate:

- Provides strength and resistance to deformation.
- Special crystal structure for optimal performance.

3. PVC (polyvinyl chloride):

- Non-foamed, high density.
- Hard, resistant to mechanical stress and high temperatures.

4. Porous polypropylene (PPP):

- Thermoplastic polymer, lightweight and flexible.
- Provides heat and sound insulation.

5. Double adhesive layer:

- Non-toxic, with high adhesion.
- Provides reliable fastening to various surfaces.

6. Protective siliconized paper:

- Prevents drying and contamination of the adhesive layer.
- Easy to remove before installation.

Surface requirements: clean, flat, smooth, dry, free of dust, wax, soap scum and grease.
Not suitable: rough (brick, stone, plywood), oil-based.

Before installation:

- Make sure the surface and tiles are at room temperature.
- Remove the protective film from the tile.

Installation:

1. Start from one corner.
2. Gently press the tile to the surface.
3. Keep it even and avoid bubbles and wrinkles.
4. Cut the tiles to size using a construction knife/scissors.
5. Press the tile firmly onto the surface.

Care instructions:

- Do not use abrasive brushes, scouring pads or detergents with a high alkaline or acidic content.
- Avoid water with high salt content.

Calculation of materials:

1. Measure the length and height of the surface to be pasted.
2. Multiply the length and height of each surface in meters to get the area.
3. Add up the areas of all surfaces.
4. Divide the resulting area by the area of one tile (0.09 sq.m.) and round up.
5. Add 2-3 tiles to the received quantity as a reserve.

Example:

- Wall length: 2.2 m.
- Wall height: 0.8 m.
- Wall area: 2.2 m * 0.8 m = 1.76 sq.m.
- Number of tiles: 1.76 sq.m / 0.09 sq.m = 19.55 (rounded to 20).
- Stock: 2-3 tiles.
- Total: 22-23 tiles.