Self-adhesive polyurethane tiles Sticker wall 305x305x1mm (D) SW-00001937

Self-adhesive polyurethane tiles Sticker wall 305x305x1mm (D) SW-00001937

Polyurethane tiles are wall coverings designed for indoor use. The top layer of polyurethane creates a 3D effect that resembles ceramic tiles. For ease of installation, tiles can be made in the form of puzzles or squares.

- Material: PU polyurethane, PET polyethylene terephthalate combined with PE polyethylene.
- Dimensions: 305 x 305 x 1 mm.
- Weight: 88 grams.
- Coverage area: 305 x 305 mm – 0.09 sq. m.
- Texture: imitating ceramic tiles/mosaics, glossy surface.

The tile includes the following layers:

1. Protective film: to protect against scratches during transportation (removable after installation).
2. Polyurethane layer: 3D effect, wear resistance.
3. Decorative layer: high-resolution printing, texture imitation, UV protection.
4. Base layer PET/PE: heat resistance (+75 degrees), resistance to abrasion, moisture, chemicals.
5. Foil layer: thermal insulation.
6. Adhesive layer: high adhesion, non-toxic.
7. Protective siliconized paper: to protect the adhesive layer (removable during installation).

Application:

Interior finishing work: decorating walls in various residential spaces, such as kitchens, living rooms, children's rooms, bedrooms and hallways, as well as in commercial spaces, including offices, reception areas, shops, beauty salons and fitness centers. Suitable for decorating furniture, doors and other smooth surfaces.

The material has a number of unique properties and advantages:

- Easy installation: Self-adhesive base, easy to cut, no gaps, no deformation.
- Moisture resistance: Ideal for wet areas, resistant to steam and mold.
- Durability: Retains its original appearance for many years.
- Style: Variety of designs and colors, the ability to combine, create a unique interior.
- Care: Easy to clean without special products. Replacement of damaged tiles without repair.
- Eco-friendly: Made from renewable materials, safe for health.

Calculation of the required amount of material:

1. Measure the length and width of the surface to be pasted.
2. Multiply the length by the width of each surface in meters and add up the results to get the area. For example, after measurements you received: wall length 3.2 m, wall width 0.8 m. 3.2 * 0.8 = 2.56 sq. m.
3. The resulting area must be divided by the area of one tile (305*305= 0.09) and rounded up: 2.56/0.09=28.44 rounded to 29.
4. During the installation process, waste associated with cutting tiles may occur, so it is recommended to add 2-3 spare tiles to the calculation.

Preparing the surface for laying tiles:

- Clean: dust, dirt, paint, wallpaper.
- Level out: unevenness, cracks.
- Dry.
- Temperature: 18-25 degrees.
- No fungus/mold.

Prime 4 hours before installation.

Instructions for gluing:

Preparation

- Make sure the surface meets the requirements.
- Ensure there are no drafts.
- Mark the reference lines.

Installation

- Cut off the protruding parts of the first tile.
- Lay the tiles in one direction.
- Remove the protective paper and press the tile to the surface, smoothing out any bubbles.
- Trim the tiles for the corners.

Final processing

Remove the protective film from the polyurethane layer after installation.

Care Tips:

Avoid

- Hard brushes and sponges, abrasive cleaning products.
- Chemicals with a high content of alkalis or acids.

Recommended

- Soft napkins made of textile or viscose.
- Gentle detergents without peeling particles.

For a deeper clean, try making a solution of warm water and mild detergent. Apply it to the dirty surface, leave for a few minutes, and then wipe with a cloth.