Self-adhesive vinyl floor covering in a roll Sticker wall 3000x600x1.5mm SW-00001822

Self-adhesive vinyl floor covering in a roll Sticker wall 3000x600x1.5mm SW-00001822 - an innovative material for decorative finishing of interior spaces is based on vulcanized polyethylene foam. Its unique structure combines strength, lightness and thermal insulation. Installation of the material is easy and simple, and its various designs imitate natural materials. This material is ideal for various interior solutions.

Peculiarities:

- Material: IXPE foam.
- Dimensions: 600x3000x1.5 mm.
- Weight: 800 grams.
- Coverage area: 600 x 3000 mm – 1.8 sq. m.
- Texture: relief, with imitation of natural materials, laminate boards. The surface is glossy or matte.

Material:

1. A protective polymer layer (0.3 mm) provides protection against scratches and minor damage, increases durability and maintains color saturation thanks to UV protection, which maintains an aesthetic appearance throughout its entire service life.
2. Decorative layer: High-resolution color film accurately imitates the texture of natural materials with a detailed image.
3. The main IXPE layer (crossed polyethylene foam) gives the material high mechanical strength, making it resistant to deformation, and also has thermal insulation and moisture and chemical resistant properties.
4. Thermal insulating foil layer: reflects heat waves, minimizing heat loss and improving the thermal insulation of the room.
5. Adhesive layer: safe, with high adhesion.
6. Protective film with markings: protects the adhesive layer from contamination and drying out until installation, is easily removed and simplifies cutting the material.

Temperature:

IXPE coating is intended for use in standard temperature conditions typical of indoor environments. This includes normal room temperature and slight environmental fluctuations ranging from 0 to 45 degrees.

Application:

Suitable for interior finishing work, including decorating floors in various types of residential premises, such as: kitchen, living room, children's or bedroom, entrance lobbies, commercial premises, office premises, reception areas, shops, beauty salons, fitness centers, workshops.

Properties and advantages of the material:

IXPE coating is an excellent choice for your home. Easy to install, does not require glue, is suitable for wet rooms, has heat and sound insulation. It will serve you for many years thanks to the protective layer. Choose from a variety of designs to create your own unique interior. The coating is easy to clean and does not require special products.

Installation:

1. During installation, it is important that the room is dry, with an air temperature of +15 to +20 degrees.
2. The surface on which the IXPE coating will be installed must be clean, dry and level. It is necessary to remove dust, dirt or oil, if necessary, level the surface with a primer and allow it to dry for at least 4 hours.
3. IXPE coating and surface must be at room temperature to ensure good adhesion of the adhesive base.
4. Begin to carefully remove the protective film from the back of the roll to expose the adhesive surface. Install the cover, starting at one corner, and press it gently onto the surface, avoiding any bubbles or wrinkles.
5. If necessary, the roll can be trimmed using a utility knife or scissors to adjust it to size, especially around the edges and corners.
6. Then press the vinyl flooring firmly onto the surface with your hand or a rubber roller to ensure good adhesion.