Self-adhesive film Sticker wall ash wood 0.45x10m SW-00001905

Self-adhesive film Sticker wall ash wood 0.45x10m SW-00001905 Self-adhesive film Sticker wall is ideal for pasting or restoring furniture, interior doors and interior decoration. A wide variety of pattern designs will help you decorate the interior of your home. Self-adhesive films are the most versatile and cost-effective finishing material. Advantages: – Suitable for any interior; – Prevents furniture from mechanical damage, scratches and chips; – Can be easily replaced; – High wear resistance; – Simple installation; – Long service life. Guidance for gluing: Before installation, it is necessary to clean the surface from grease, dirt, dust, wipe dry with a clean cloth or napkin. If you need to degrease the base, use dishwashing detergent or (in difficult cases) an alkaline solution. Polished, varnished, painted surfaces are ideal for gluing with film. Coat clean boards or plywood with polyester or primer varnish. Treat cracked and uneven surfaces with wood putty and sand with sandpaper. Then this surface needs to be covered with an acrylic-based primer so that the pasted film adheres well. Pasting: 1. Separate the paper from the film by about 4-5cm; 2. Apply the film to the surface and glue the separated edge; 3. Evenly and slowly pull the paper with one hand from the remaining film; with the other hand, you need to smooth the film with a soft rag or towel. To avoid the appearance of bubbles, you need to move from the center to the edge of the film. If bubbles still remain, they will need to be carefully pierced with a needle, thus releasing the air. Cleaning and care: Under normal conditions, water is sufficient for cleaning. If the water is heavily soiled, you can add regular detergent to the water. Do not use washing powders or products containing abrasives and acetone. Depending on the settings of your monitor or phone, the color of the film on your screen may differ from the actual shade or color of the film.