Open type

Features of the "Mini" system for roller blinds: 1. Mounting corners are attached to the window sash (frame) or glazing bead. 2. The leading line is located behind the fabric in such a way that after lowering the fabric it is covered and not visible. 3. The upper and lower ends of the fishing line are completely masked by the mounting elements. 4. The simple and aesthetically pleasing bottom attachment allows for easy line tensioning and adjustments at any time without additional complex operations. 5. The dimensions of the squares are 35*35mm. 6. Aluminum shaft with a diameter of 18 mm. 7. To avoid shaft deflection, with a width of more than 1400 mm, a reinforcing profile is inserted into the shaft. Features of the RM-25 system for roller blinds: 1. Plastic brackets are attached to the window opening, ceiling, slope, window sash (frame). 2. Dimensions of mounting brackets - 42*58 mm. 3. Aluminum shaft with a diameter of 25mm is used. 4. Universal chain self-locking mechanism. 5. Silent, soft operation of the mechanism. 6. Maximum dimensions of the system: width - 1600 mm, height 2400 mm, product area 3.5 sq. m. Features of the S-25 roller blind system: 1. Free-hanging roller blind system. 2. White plastic components. 3. Dimensions of mounting brackets “S-25” are 28*55 mm. 4. The width of the finished product is 38 mm greater than the width of the fabric (16 mm on the control side and 22 mm on the other side). 5. Aluminum shaft with a diameter of 25mm is used. 6. Silent, soft operation of the self-locking mechanism. 7. Maximum dimensions of the system are 1600*2400 mm. 8. The “S-25” system is equipped with a stopper and a chain holder. Features of the "RM-32" system for roller blinds: 1. Metal brackets are attached to the window opening, ceiling, slope, window sash (frame). 2. Dimensions of mounting brackets “RM-32”: 53*65mm; 3. Aluminum shaft with a diameter of 32mm is used. 4. Universal chain self-locking mechanism. 5. Silent, soft operation of the mechanism. 6. Maximum dimensions of the systems: width - 2500 mm, height 3200 mm, product area 3.5 sq. m. Features of the roller blind system "S-32" 1. The "S-32" system has 2 possible options: S-32 with short mounting brackets and S-32 with long mounting brackets, the latter allow for large winding of fabric, as they have large dimensions . 2. In the S-32 system, to simplify installation, at the client’s request, an upper mounting strip can be used, which can be installed with both short and long mounting brackets. 3. The upper mounting strip is mounted on the wall, ceiling or window frame using clips (2 clips up to a width of 1500 mm, subsequent ones for every 500 mm). The fastening strip allows you to level out the unevenness of the plane on which the roller blind is installed. In this case, it is not the fastening brackets that are attached to the self-tapping screws, but the clips, which reduces the amount of time for installing the roller blinds, since the clips do not require precise measurement of the place of their attachment to the plane, since the upper fastening bar can move along them to the left and right. 4. The finished product is 30 mm wider than the fabric (16 mm on the control side and 14 mm on the other side). 5. Silent, soft operation of the mechanism. 6. Maximum dimensions of systems: - Maximum system width 2500 mm. - Maximum system height 4000 mm. - The maximum area of roller blinds is 5.0 square meters. 7. Dimensions of mounting brackets “S-32”: - short mounting brackets in the “S-32” system 38*57 mm; - long mounting brackets in the “S-32” system 38*70 mm. 8. Aluminum shaft with a diameter of 32mm is used. 9. The “S-32” system is equipped with a stopper and a chain holder. 10. Direct or reverse winding is possible. Features of the open-type roller blind system “S-40” 1. The “S-40” system has 2 possible options: S-40 with short fastening brackets and S-40 with long fastening brackets, the latter allow for greater winding of fabric, since they have large dimensions. 2. In the S-40 system, at the request of the client, to simplify installation, an upper mounting strip can be used, which can be installed with both short and long mounting brackets. 3. The upper fastening strip is mounted on the wall, ceiling or window frame using clips (2 clips up to a width of 1500 mm, subsequent ones - every 500 mm). 4. The fastening strip allows you to level out the unevenness of the plane on which the roller blind is installed. 5. In this case, it is not the mounting brackets that are attached to the self-tapping screws, but the clips, which reduces the amount of time for installing the roller blinds, since the clips do not require accurately measuring the place of their attachment to the plane, since the upper fastening bar can move along them to the left and right. 6. Silent, soft operation of the mechanism. 7. Maximum dimensions of systems: - Maximum system width 2900 mm. - Maximum system height 4300 mm. - The maximum area of roller blinds is 6.0 square meters. 8. Dimensions of mounting brackets “S-40”: - short mounting brackets in the “S-40” system 38*57 mm; - Long mounting brackets in the “S-40” system 38*70 mm. 9. The width of the finished product is 32 mm greater than the width of the fabric (20 mm on the control side and 12 mm on the other side). 10. An aluminum shaft with a diameter of 40mm is used. 11. The “S-40” system is equipped with a stopper and a chain holder. 12. Direct or reverse winding is possible Features of the "RM-40" roller blind system 1. The RM-40 system does not use an upper fastening bar, but only fastening brackets. 2. A compensation spring is used, which makes it easier to lift a large blade. 3. Silent, soft operation of the mechanism. 4. Maximum system width 2900 mm. 5. Maximum system height 4300 mm. 6. The maximum area of roller blinds is 6.0 square meters. 7. Dimensions of mounting brackets in the “RM-40” system are 33*74 mm; 8. The width of the finished product is 33 mm greater than the width of the fabric (21 mm on the control side and 12 mm on the other side). 9. An aluminum shaft with a diameter of 40mm is used. 10. The “RM-40” system is equipped with a stopper and a chain holder. 11. Direct or reverse winding is possible Features of the "S-45" roller blind system 1. The "S-45" system has 2 possible options: S-45 with short mounting brackets and S-45 with long mounting brackets, the latter allow for larger winding fabrics, as they have large dimensions. 2.Silent, soft operation of the mechanism. 3.Maximum dimensions of the systems: - Maximum width of the system is 3300 mm. - Maximum system height 4500 mm. - The maximum area of roller blinds is 7.5 square meters. 4. Dimensions of the “S-45” mounting brackets: - The length of the short mounting brackets in the “S-45” system is 27*78 mm; - The length of the long mounting brackets in the “S-45” system is 27*113 mm. 5. The width of the finished product is 27 mm greater than the width of the fabric (18 mm on the control side and 9 mm on the other side). 6. Aluminum shaft with a diameter of 45mm is used. 7. The “S-45” system is equipped with a stopper and a chain holder. 8. Direct or reverse winding is possible.