Day-Night system

Features of the "Day-Night-19" system for roller blinds: 1. The special structure of the system, as well as the "Day-Night" type fabrics, make it possible to finely regulate the light flux into the room. When the transparent parts of both layers of fabric coincide, more light penetrates into the room; when the transparent part of one layer coincides with the opaque part of another layer, the curtain becomes opaque and gives greater darkness. 2. The mounting brackets are inserted into the mounting strip, which is attached to the window frame or ceiling using clips. 3. The fabric is free-hanging (there are no guides) 4. The finished product is wider than the fabric (due to the fastening brackets) - 44 mm (22 mm on each side) 5. The dimensions of the fastening brackets are 65 * 53 mm. 6. Aluminum shaft with a diameter of 19 mm. 7. Self-locking mechanism allows you to stop the fabric in any position. Features of the "Day-Night-SK 19" system for roller blinds: 1. The cassette is glued to the window sash (frame) with 19 mm double-sided tape. The guides are glued to the glazing bead or sash (frame) of the window with double-sided tape 9 mm wide. 2. The upper edge of the fabric is attached to the shaft using 15 mm tape, the lower edge of the fabric is fixed in a special groove in the cassette using 7 mm blockade tape. 3. Cassette dimensions - 52*60mm, height with a protrusion for gluing 15mm adhesive tape - 70mm, guide dimensions - 22*13*22mm. 4. Aluminum shaft with a diameter of 19mm. 5. The system is available in two colors: white and brown. Features of the "Day-Night-32" system for roller blinds: 1. The "Day-Night-32" system has 2 possible options: Day-Night-32 with short fastening brackets and Day-Night-32 with long fastening brackets, the latter allow carry out large winding of fabric, as they have large dimensions. 2. The mounting brackets are inserted into the mounting strip, which is attached to the window frame or ceiling using clips. 3. The fastening strip allows you to level out the unevenness of the plane on which the roller blind is installed. 4. Installation on special clips significantly reduces the amount of time for installing roller blinds. And they do not require accurately measuring the place where the clips are attached to the plane, since the upper fastening bar can move along them to the left and right. 5. The finished product is 30 mm wider than the fabric (16 mm on the control side and 14 mm on the other side). 6. Maximum system width 2200 mm. 7. Maximum system height 3000 mm. 8. The maximum area of a roller blind is 5.0 square meters. 9. The distance of the system from the wall with short mounting brackets in the “Day-Night-32” system is 69 mm. 10. Removal of the system from the wall with long mounting brackets in the “Day-Night-32” system is 82 mm. 11. An aluminum shaft with a diameter of 32mm is used. 12. The “Day-Night-32” system is equipped with a stopper and a chain holder. Features of the "Day-Night-40" system for roller blinds: 1. The "Day-Night-40" system has 2 possible options: Day-Night-40 with short fastening brackets and Day-Night-40 with long fastening brackets, the latter allow carry out large winding of fabric, as they have large dimensions. 2. The mounting brackets are inserted into the mounting strip, which is attached to the wall or ceiling using clips. 3. The fastening strip allows you to level out the unevenness of the plane on which the roller blind is installed. 4. Installation on special clips significantly reduces the amount of time for installing roller blinds and does not require accurately measuring the place where the clips are attached to the plane, since the upper fastening bar can move along them to the left and right. 5. The finished product is 32 mm wider than the fabric (20 mm on the control side and 12 mm on the other side). 6. Maximum system width 2600 mm. 7. Maximum system height 3000 mm. 8. The maximum area of roller blinds is 6.0 square meters. 9. The distance of the system from the wall with short mounting brackets in the “Day-Night-40” system is 69 mm. 10. Removal of the system from the wall with long mounting brackets in the “Day-Night-40” system is 82 mm. 11. The height of both short and long brackets is 38 mm. 12. An aluminum shaft with a diameter of 40mm is used. 13. The “Day-Night-40” system is equipped with a stopper and a chain holder. Features of the "Day-Night-SK 40" system for roller blinds: 1. At the client's request, the "SK-40" system can be equipped with long or short curtain rods, with or without curtain rod extensions, which allow you to increase the distance between the wall and the roller blind. Such curtain rods are used when installing roller blinds of the “SK-40” system on a wall or ceiling if their plane does not allow the installation of clips with a box. 2. Cornice extension 85 mm - small bracket, 125 mm - large bracket, 195 mm - large bracket with extension. 3. Box extension - 90 mm, box height - 89 mm. 4. Silent, soft operation of the mechanism. 5. Maximum system dimensions: 6. Maximum system width 2900 mm. 7. Maximum system height 4300 mm. 8. The maximum area of roller blinds is 6.0 square meters. 9. The width of the finished product is 37 mm greater than the width of the fabric (22 mm on the control side and 15 mm on the other side). 10. An aluminum shaft with a diameter of 40mm is used. 11. The “SK-40” system is equipped with a stopper and a chain holder. 12. Direct or reverse winding possible.